|
|
| Line 4: |
Line 4: |
|
| |
|
| <div class="noautonum">__TOC__</div> | | <div class="noautonum">__TOC__</div> |
|
| |
| == 11-004 ==
| |
| === [Howto] How to use IEEE drives on x64/x128 ===
| |
|
| |
| You want to use an IEEE drive (i.e., CBM 2031, 2040, 3040, 4040, 8050, 8250, or SFD 1001) with your x64 and/or x128 emulator. Anyway, the appropriate settings in Settings/Drive Settings are grayed out.
| |
|
| |
| To be able to use an IEEE drive, you need to enable IEEE emulation for the emulator. To do this, follow the following steps:
| |
| * Download the IEEE 488 ROM image from the CBM archives (formerly known as FUNET)
| |
| * Attach that image with File/Attach cartridge image/IEEE488 interface image.
| |
| * Make sure you have a one-drive system only (that is, go to Settings/Peripheral Setting, uncheck "use IEC device" for all devices, go to Settings/Drive Settings and select "Floppy type" as "none" for all drives other than drive 8.
| |
| * After this, all drives can be selected in x64 and x128.
| |
Revision as of 15:31, 1 May 2022
Purpose of this page: collect some of the old knowledge base articles so they dont get lost and can at some point be merged into the main documentation. Anything that has been merged into vice.texi should get removed from here.
The information provided here might be outdated or even plain wrong - take it with a grain of salt